Torsion springs

Where torsional or rotational force is required, torsion springs may be applied.

Torsion springs are part of the levers, holes, switches and hinges and thus play an important role in engineering and engineering and construction of the plant, in the automotive and electronics industry as well as in many consumer goods.

Basically, the torsion springs are helical in shape with edges rotating in angular bending. Each end is connected to other components and when the components rotate around the center of the spring, the spring will try to push them back to their original position.

Depending on the application, we wind individual torsion springs to work either clockwise or counterclockwise as well as twin torsion springs with a winding wrapped clockwise and another coil rotating counterclockwise. We adjust the shape and position of the legs to achieve optimum power transmission for the unique your application.

We adjust the properties of the springs to their optimum values ​​by removing the eyes, the specified heat treatment and the comprehensive tests to ensure compliance with the tolerances and test specifications required by you.

We set torsion springs in relation to material, inner and outer diameter, foot style and leg orientation after individual calculation.
Please contact us!


1- Steel wire for mechanical springs – Patented cold drawn unalloyed spring steel wire ( EN 10270-1 ) A,B,C,D Class
2- Steel wire for mechanical springs – Oil hardened and tempered spring steel wire ( EN 10270-2 )
3- Steel wire for mechanical springs – Stainless spring steel wire ( EN 10270-3 )

Diameter from 0.2mm to 7.0mm

Pitch: Narrow, step by step, progressive step

Wind direction: Clockwise or counterclockwise. double torsion springs turning clockwise and counterclockwise

Foot style: Single or double torsion springs, closed ends, closed and grounded ends, open ends

Leg Orientation

Applied, axial, radial, radial / tangent

Wear one or more times

Coating and surface treatment

1- Stress relieved
2- Elecrolytic coating
3- Galvanized
4- others on demand

Our springs are characterizedby lower production tolerances due to:

Therefore, we are adding the "Factory for Precision-Made Springs" as a subtitle to our company name.

We collaborate with technical universities in different research and development projects.

High precision springs are used inter alia as contact elements, energy storage elements, vibration elements, damping elements or bearing elements in many industries such as:

  • Engineering and Construction
  • Manufacture of tools Hydraulics industry
  • Automotive / Commercial Vehicle Industry
  • Measurement and control technology
  • Filter and fluid technology
  • Electronics and Electrical Engineering
  • Medical technology Environmental Technology
  • Furniture industry
  • Construction industry